FLOATING MEDIA SHELVES - PINE

Description

Floating Media Shelf (Pine) with groove for media cables:

Features and Benefits:

Manufactured from 100% Kiln dried South African Pine

Lacquered and treated for protection and durability.

(DIY instructions and "Drilling Guide", with fittings enclosed)

Safety:

Maximum weight 15kg

Standard size: (Thickness x Width)                                                                       

30mm x 300mm

Standard Length + Colour + Selling Price:                                                                   

440mm Mahogany          R410.04 VAT Incl

600mm Mahogany          R504.51 VAT Incl

900mm Mahogany          R693.45 VAT Incl

1200mm Mahogany        R879.75 VAT Incl

440mm White                 R410.04 VAT Incl

600mm White                 R504.51 VAT Incl

900mm White                 R693.45 VAT Incl

1200mm White               R883.20 VAT Incl 

SPECIAL FEATURES:

The wider 300mm shelf allows for a small Media Cable Groove, to feed media player cables through BEFORE securing the shelf to the wall.

The 5mm x 20mm groove beveled into the back of the shelf, allows for the convenient spacing of Media cables and keeps the shelf flush with the wall.

The groove is neatly beveled in such a way that should the shelf not be used for Media cabling, it will not impair the use of the shelf.

Enclosed with your product:

1 x 100% SA Pine Floating Media Shelf with groove for cables;

1 x Drilling Guide - to mark the holes to be drilled;

2 x 75mm T-Brackets welded onto 5mm wall plates;

4 x (6x45mm) Nail-In-Anchors with wall plugs;

MOUNTING INSTRUCTIONS with SOME VALUABLE TIPS:

1. Position the enclosed "Drilling Guide" (DG) where you wish to mount the shelf. Once done, use a piece of tape or adhesive to secure the "DG" onto the wall.
2. Use a spirit level to make sure that the "DG" is straight / level.
3. Drill holes into the wall as indicated on the "DG" & remove once done.

...WHEN DRILLING THE 4 HOLES, ANGLE YOUR DRILL 1-2 DEGREES UPWARD i.e. DRILL SLIGHTLY DOWN INTO THE BRICK - WHEN MOUNTING THE SHELF, THE NATURAL WEIGHT OF THE SHELF WILL COMPENSATE AND RESULT IN A PERFECTLY FLUSH FLOATING SHELF...

...WHEN MOUNTING THE T-BRACKET WALL PLATES, MAKE SURE THAT THE 2 HOLES ON THE WALL PLATE ARE POSITIONED AT THE TOP OF THE WALL PLATE, NOT THE BOTTOM - THIS STABILIZES THE WALL PLATE AGAINST THE WALL...

4. Place metal T-brackets over the holes drilled, then insert the nail-in anchors with their plugs, through the T-brackets into the holes drilled.

...DO NOT PUT THE WALL PLUG INTO THE HOLE FIRST - SCREW THE NAIL-IN-ANCHOR INTO THE WALL PLUG AND THEN SLIDE THEM BOTH THROUGH THE T-BRACKET HOLES, INTO THE HOLES DRILLED IN THE WALL. NOT DOING THIS COULD RESULT IN THE SHELF BEING SEMI-FLUSH WITH THE WALL...

5. To test positioning, gently push the shelf onto the brackets. If correct, remove the shelf and hammer in the nail-in anchors. Once done, re-mount the shelf - stand back and admire your handy work.