Floating Shelf for Bathroom Sanitary Ware – 200mm Wide
Features and Benefits:
Ideal for storing hand-lotion and any small container/s.
Manufactured from 100% Kiln dried South African Pine.
Lacquered and treated for protection and durability.
(DIY instructions and template, with fittings enclosed)
Standard size: (Thickness x Width)
- 30mm x 200mm
Maximum weight 15kg
Enclosed with your product:
1 x 100% SA Pine Floating Bathroom Shelf;
1 x Drilling Guide - to mark the holes to be drilled;
2 x 75mm T-Brackets welded onto 5mm wall plates;
4 x (6x45mm) Nail-In-Anchors with wall plugs;
MOUNTING INSTRUCTIONS with SOME VALUABLE TIPS:
1. Position the enclosed "Drilling Guide" (DG) where you wish to mount the shelf. Once done, use a piece of tape or adhesive to secure the "DG" onto the wall.
2. Use a spirit level to make sure that the "DG" is straight / level.
3. Drill holes into the wall as indicated on the "DG" & remove once done.
...WHEN DRILLING THE 4 HOLES, ANGLE YOUR DRILL 1-2 DEGREES UPWARD i.e. DRILL SLIGHTLY DOWN INTO THE BRICK - WHEN MOUNTING THE SHELF, THE NATURAL WEIGHT OF THE SHELF WILL COMPENSATE AND RESULT IN A PERFECTLY FLUSH FLOATING SHELF...
...WHEN MOUNTING THE T-BRACKET WALL PLATES, MAKE SURE THAT THE 2 HOLES ON THE WALL PLATE ARE POSITIONED AT THE TOP OF THE WALL PLATE, NOT THE BOTTOM - THIS STABILIZES THE WALL PLATE AGAINST THE WALL...
4. Place metal T-brackets over the holes drilled, then insert the nail-in anchors with their plugs, through the T-brackets into the holes drilled.
...DO NOT PUT THE WALL PLUG INTO THE HOLE FIRST - SCREW THE NAIL-IN-ANCHOR INTO THE WALL PLUG AND THEN SLIDE THEM BOTH THROUGH THE T-BRACKET HOLES, INTO THE HOLES DRILLED IN THE WALL. NOT DOING THIS COULD RESULT IN THE SHELF BEING SEMI-FLUSH WITH THE WALL...
5. To test positioning, gently push the shelf onto the brackets. If correct, remove the shelf and hammer in the nail-in anchors. Once done, re-mount the shelf - stand back and admire your handy work.